English 
Bulgarian 
GRAPHIX
Description
High-end controller for up to three active vacuum gauges. Displays the status of each measuring instrument via a large touch screen. With digital and analogue outputs, together with relay control: a great way to centralise the pressure readings from your system. Workstations for active sensors Additional display and operation tools are required to integrate active sensors into system controllers. They provide the transmitters with the necessary supply voltage or for local display of the measured values. For such applications, Leybold offers various tools. The basic DISPLAY line and the advanced GRAPHIX line are each designed for a wide range of applications. The GRAPHIX vacuum controllers are universal controllers for connecting active vacuum sensors for direct pressure measurement in the range from 10-10 mbar to 2000 mbar. This covers pressure reading and control for most vacuum processes and can be used in a wide range of applications. These active measuring controllers are universal 1, 2 or 3 channel displays and operating modules with permanent display of all measuring channels, suitable for the active sensors of the THERMOVAC TTR series, the CERAVAC CTR series, the DU series linear sensors, the PENNINGVAC PTR series and the IONIVAC ITR series.
Additional information
• Easy and intuitive With the GRAPHIX controllers you can easily control your entire vacuum system. Operation is easy with a simple plug and play solution. 3.5 inch touch display with intuitive menu interface and graphic display with measurement data range, standard 3 lines, large text, diagram and large dial. The controller can configure each gauge input to read in mbar, torr, micron, pascal or psi and also apply gas correction factors to deliver true pressure readings to gas dependent gauges. Alternative active vacuum gauges can be connected to the controller, you just need to enter the voltage scaling and range and then it can read the output. • Universal The device is considered universal, with a 100-240 V input power supply, allowing for easy installation in worldwide systems. With this in mind, the controller can be set up with ten languages for ease of use by anyone, including English, German, Italian, French, Chinese, Japanese and more. The controller can be installed either by rack mounting (1/4 19" 3 HU) or simply placed on a tabletop. • Analog and digital The controller has both analog and digital interfaces (with adjustable baud rate) for integration into your network. In addition, there is built-in data logging, with retrieval available via a front-mounted USB port for easy access if the device is mounted in a rack. It is also possible to connect additional linear vacuum gauges, setting the parameters via the touch interface. Internal and external data logging (USB port on the front) for configuration and real-time data measurement Display range from 1 x 10-10 to 2000 mbar 3 separate outputs for recording diagrams from 0 to 10 V for each measuring channel (analog output) RS 232 C / RS 485 C interface with adjustable baud rate Selectable display between mbar, torr, micron, pascal or psi 3.5“ TFT touch display with intuitive user interface, compact installation and desktop housing (1/4 19" 3 HU)